Mid-East

The solid lacewood body lends itself to the soft gentle curves of this ten string lyre. The ten metal strings provide a classical sound that is enhanced by the solid spruce soundboard. When you are...

Red cedar, tunable goatskin with 7 sets of steel jingles. The depth of the shell is 2 inches. Includes tuning tool.

Thin = approximately 0.01 of an inch or 3-4 sheets of printer paper

12 x 22 inch Hand hewn sheesham Djembe with rustic tribal style carvings and goatskin head. The head is tunable by cords. The simple hand hewn carvings are accented by the variations in the wood...

Small Single chambered Brazilian Caxixi 4 inches total height by 1.5 inches in diameter at the base. Hand crafted to be the best sounding caxixi. Following the traditional construction, the base of...

Tambourine Tuning Bolts, 5 pc. (Item Code: TAM-TB-BGL) Set of 5 Replacement clamps for exterior tunable Tambourines. Approximately 2 3/8 inch in length.

Pair of wooden beaters, one thin straight switch and one thicker, curved beater.Overall length - 16 inchesThis is a natural product, the color and measurements can vary.

Premounted goatskin replacement head for 13" pandeiros. Fits PAND.

Premounted goatskin replacement head for 10" pandeiros. Fits PAN1.

Allen Wrench, 3mm (Item Code: WRNA-3MM) 0 .118 inch (3mm) hexagonal tuning allen wrench for Turkish and Egyptian Tambourines.

Sheesham, bolt tuned goatskin head with 18 sets of steel jingles. Includes tuning tool.

100, 5/8" brass round bells on a wire coil. Leave together and bend to the necessary shape, or, uncoil and use separately.

Sheesham, tunable goatskin with 7 sets of steel jingles. The depth of the shell is 2 inches. Includes tuning tool.

Rubber Mallet. Beater end is covered in faux suede and it has a plastic handle. Overall length is 10.5 inches.

Total of 200, 5/8" brass bells. 100 bells are braided into each cord. Cord color may vary. Bells are primarily worn by Indian dancers on their ankles or wrists to accent their movements. You can also...

Rubber Mallet. Beater end is not covered and it has a plastic handle. Over all length is 10.5 inches.

Wrench, 9.5mm (.374 inches) (Item Code: WRNC-95MM) 9.5mm Wrench for exterior bolt tuned pandieros, bodhrans and doumbeks. 9.5mm is 0.374 inches

Allen Wrench, 4mm (.157 inch) (Item Code: WRNA-4MM) 4 mm hexagonal Allen wrench for bodhrans. 4mm is 0.157 inches.

Adding just the right sound to various activities and performances, this common belly and Indian dance accessory is very versatile and can be worn on your ankles or wrists and can also hang on drums...

Adding just the right sound to various activities and performances, this common belly and Indian dance accessory is very versatile and can be worn on your ankles or wrists and can also hang on drums...

The Tambourine carrying case is designed for 10" tambourines and smaller. Quilted black nylon.

Beater for frame drums made with cane, foam and imitation leather. Approximately 13" in length. Great for a nice, clean tone.

Total of 50, 5/8" brass bells. 25 bells are braided into each cord. Cord color may vary. The northern Indian State of Uttar Pradesh is well known for quality brass manufactories. Once cast, these...

Total of 100, 5/8" clam shaped brass bells. 50 bells are braided into each cord. Cord color may vary. The northern Indian State of Uttar Pradesh is well known for quality brass manufactories. Once...

Total of 48, 5/8" solid brass bells on two vinyl straps with buckles. Can be held or worn on ankles or wrists. Colors may vary. Straps are 4" long. When buckled they adjust from about 2.5" diameter...