Flat round piece of goatskin with hair.Thin = approximately 0.01 of an inch or 3-4 sheets of printer paperMedium = approximately 0.015 of an inch or 4-5 sheets of printer paperThick = approximately 0.02 of an inch or 5-6 sheets of printer paperAll skins...

Fiberskyn replacement head for Copper and Aluminum doumbeks. Head has an inside diameter of 8 7/8" and a crown depth of 3/8". May not fit all doumbeks. Please measure your drum carefully.

Flat round piece of natural goatskin.Thin = approximately 0.01 of an inch or 3-4 sheets of printer paperMedium = approximately 0.015 of an inch or 4-5 sheets of printer paperThick = approximately 0.02 of an inch or 5-6 sheets of printer paperAll skins...

Wrench, 9.5mm (.374 inches) (Item Code: WRNC-95MM) 9.5mm Wrench for exterior bolt tuned pandieros, bodhrans and doumbeks. 9.5mm is 0.374 inches

Allen Wrench, 4mm (.157 inch) (Item Code: WRNA-4MM) 4 mm hexagonal Allen wrench for bodhrans. 4mm is 0.157 inches.

Replacement regulator reed for Uilleann pipes. Reed fits Tenor, Baritone or Bass regulator. This is a plastic reed tied to a copper staple. Overall length of reed with staple is 2.25 inches. Width of plastic reed is 3/8 of an inch. Length of the reed,...

A pair of well balanced medium soft density mallets excellent for the 6-inch and 8-inch Idiopan steel tongue drums.

A pair of well balanced medium soft density mallets excellent for the 12-inch and 14-inch Idiopan steel tongue drums.

Solid wood handle. Over all length 11"; 13 steel bells. Bells are about 1" x 3/4" in size. Wood may vary./!\ WARNING: CHOKING HAZARD - Small parts - Not for children under 3 years.

Flat round piece of natural goatskin.Thin = approximately 0.01 of an inch or 3-4 sheets of printer paperMedium = approximately 0.015 of an inch or 4-5 sheets of printer paperThick = approximately 0.02 of an inch or 5-6 sheets of printer paperAll skins...

Flat round piece of natural goatskin.Thin = approximately 0.01 of an inch or 3-4 sheets of printer paperMedium = approximately 0.015 of an inch or 4-5 sheets of printer paperThick = approximately 0.02 of an inch or 5-6 sheets of printer paperAll skins...

Flat round piece of natural goatskin. Thin = approximately 0.01 of an inch or 3-4 sheets of printer paper Medium = approximately 0.015 of an inch or 4-5 sheets of printer paper Thick = approximately 0.02 of an inch or 5-6 sheets of printer...

Flat round piece of natural goatskin.Thin = approximately 0.01 of an inch or 3-4 sheets of printer paperMedium = approximately 0.015 of an inch or 4-5 sheets of printer paperThick = approximately 0.02 of an inch or 5-6 sheets of printer paperAll skins...

Flat round piece of natural goatskin.Thin = approximately 0.01 of an inch or 3-4 sheets of printer paperMedium = approximately 0.015 of an inch or 4-5 sheets of printer paperThick = approximately 0.02 of an inch or 5-6 sheets of printer paperAll skins...

Flat round piece of natural goatskin.Thin = approximately 0.01 of an inch or 3-4 sheets of printer paperMedium = approximately 0.015 of an inch or 4-5 sheets of printer paperThick = approximately 0.02 of an inch or 5-6 sheets of printer paperAll skins...

Flat round piece of natural goatskin.Thin = approximately 0.01 of an inch or 3-4 sheets of printer paperMedium = approximately 0.015 of an inch or 4-5 sheets of printer paperThick = approximately 0.02 of an inch or 5-6 sheets of printer paperAll skins...

Flat round piece of natural goatskin.Thin = approximately 0.01 of an inch or 3-4 sheets of printer paperMedium = approximately 0.015 of an inch or 4-5 sheets of printer paperThick = approximately 0.02 of an inch or 5-6 sheets of printer paperAll skins...

This gong beater made from solid sheesham and dense foam wrapped by nylon. It is approximately 1 1/4" x 5".

This gong beater made from solid mulberry and dense foam wrapped by nylon. It is approximately 2 1/2" x 18".

This gong beater made from solid mulberry and dense foam wrapped by nylon. It is approximately 2" x 13".

Idiopan display ring, 4" x .375"

5"x8", goatskin head. Aluminum engraved with floral pattern. Bolt tuning.

Remo WEATHERKING world percussion drum heads rely on the same open channel system that has established the drumset heads as the benchmark since 1957. Skyndeep is a method of graphic infusion of pigment into a polyester surface making it uniquely...

This set, of four nylon Cumbus Ukulele strings, is the Avarez brand. The strings are approximately 27 inches long and have the following approximate gauges: 0.028; 0.031; 0.037; 0.041 inches.

Flat round piece of natural calfskin.Thin = approximately 0.01 of an inch or 3-4 sheets of printer paperMedium = approximately 0.015 of an inch or 4-5 sheets of printer paperThick = approximately 0.02 of an inch or 5-6 sheets of printer paperAll skins...

Flat round piece of natural calfskin.Thin = approximately 0.01 of an inch or 3-4 sheets of printer paperMedium = approximately 0.015 of an inch or 4-5 sheets of printer paperThick = approximately 0.02 of an inch or 5-6 sheets of printer paperAll skins...

Pair of Sheesham Castanets. The pair consists of two sets, a left and a right. Each set has two corded clam-shaped sheesham clappers. Each pair has a slightly larger male set and a slightly smaller female set of castanets usually marked M and F...

Replacement reed for the taxi horn.

18 x 3.5 inch red cedar bodhran with inside tuning and two cross bars. This solid red cedar frame has a fixed crossbar for support. The bolt tuning is hidden on the inside of the frame. You will love the sound of the natural goatskin head. Easy and fun...

Bodhran, 18" x 3 1/2", Tune, Black T Bar Bolt tuning is hidden on the inside of the frame. Goatskin, mulberry wood painted black. Includes a tipper and a tuning wrench.

14 by 3.5 Inch Bodhran. Primary rhythmic accompaniment for Celtic and Irish music. The natural goatskin head has an attractive Roosebeck logo. The beautiful sheesham frame is trimmed by a black band. the drum is eaily tuned by adjusting hardware hidden...

Bodhran, 14" x 3 1/2", Mulberry Tune In, Single. Bolt tuning is hidden on the inside of the frame. There is a single removable bar. A Goatskin head is mounted on a mulberry wood frame with natural finish. Includes a tipper and a tuning wrench.

10 pack of replacement tuning mechanism for the inside tunable bodhran.The mounting bracket is approximately 1.25 inches wide and 0.5 inches tall.

Inexpensive soft gig bag for our 18" bodhran. Includes side pocket for tippers and twin zippers for easy opening and closing. Fits Bodhrans up to 5" deep.

9 inch long Tipper with straight sides and a center grove. Good beginner stick since it is light weight has a groove in the middle for a better grip. The comfort and grip for each tipper is unique. You can also expect different sounds from different...

7 inch long tipper with knob-ends. Good for any beginner. These straight tipper with knob-ends comes in various lengths; this is the smallest of our knob-end tippers. Find a lenght that is comfortable for your hand size. The comfort and grip for each...

9 inch tipper with knob-ends. This is the longest of our simple knob-end tippers. Good for any beginner. The straight tipper with knob-ends comes in various lengths, find one that is comfortable for your hand size. The tipper is swung back and forth...

9 to 9.25 inch tipper with a double-ridge in the center and two wide knob-ends. The tipper is swung back and forth against the head of a Bodhran to create lively rhythmic patterns. The comfort and grip for each tipper is unique. You can also expect...

9.25 inch Sheesham tipper with 2 off center ridges and knob-ends. Easy to hold. The shape of this tipper provides versatility for holding it at the center, off center or end. The comfort and grip for each tipper is unique. You can also expect different...

9-9.5 inch tipper with a double knob at each end that looks like a Belaying Pin. The tipper is swung back and forth against the head of a Bodhran to create lively rhythmic patterns. A tipper is also called a: bone, beater or cipin.The comfort and grip...