banjira

Low (thoppi) mridangam head. The mridangam has two opposing heads, low (thoppi) and pitched (valanthalai). Sliver-thin reeds are inserted between the two layers of the pitched head to create a...

Low (thoppi) mridangam head. The mridangam has two opposing heads, low (thoppi) and pitched (valanthalai). Sliver-thin reeds are inserted between the two layers of the pitched head to create a...

Putty for bass mridangam head. 10 Grams of putty for the Thoppi (left) head of the mridangam. The putty is selected to create a pleasing Bass sound when applied to the center of the left head.

Sheesham wooden stick (also called Pullu) for tuning the Mridangam. The wooden stick is for holding it against the Mridangam head and tapping it with a stone to adjust the pitch.Item overall length...

Two-headed wooden dholak drum that is shaped like a barrel with a tenor and bass head. Drum is held horizontally and played on both sides. Heads are held in place and tuned by nuts and bolts. Nuts...

A pair of cattle-bone trim murri pieces for the left and right sides of the base of the neck. These are blanks and will require some trimming to fit.

This nylon case has one full inch of firm padding on all sides, top and bottom and two adjustable shoulder straps. A 12" x 9" Velcro pocket on the front will hold instruction materials. The case's...

Pitched (valanthalai) mridangam head. The mridangam has two opposing heads, bass (thoppi) and pitched (valanthalai). Sliver-thin reeds are inserted between the two layers of the pitched head to...

Pitched (valanthalai) mridangam head. The mridangam has two opposing heads, bass (thoppi) and pitched (valanthalai). Sliver-thin reeds are inserted between the two layers of the pitched head to...

The purpose of the egg beads are to help in the fine tuning of a sitar. The bead is placed on a string and as the bead is moved, the angle of the string changes, thus changing the tension in the...

Unloaded goatskin head for the Dhol. 13 inch diameter.

Synthetic replacement head for the Dhol. 13 inch diameter.

Sheesham (or similar hardwood) tabla is paired with a nickeled brass bayan. This Indian percussion instrument is used in the classical, popular and devotional music of the Indian subcontinent and in...

Sheesham (or similar hardwood) tabla is paired with a nickeled brass bayan. This Indian percussion instrument is used in the classical, popular and devotional music of the Indian subcontinent and in...

Sheesham (or similar hardwood) tabla is paired with a nickeled brass bayan. This Indian percussion instrument is used in the classical, popular and devotional music of the Indian subcontinent and...

This tabla set has a 5.25 inch solid wood dayan paired with a stainless steel bayan.  Both drums have traditional strap tuned heads.  The stainless steel bayan has an attractive...

Rudra Veena Nut, Cattle-Bone (Item Code: RUDN) This is a natural material and you should expect some variations. 3.125 wide by 1.75 inches tall and 0.25 inches wide (7.9 cm wide x 4.3 cm tall and .5...

Toomba set for Rudra Veena (Set of 2).  Made from gourd, wood, brass tube with threads (24 mm x 1.0 mm).  Designs and measurements do vary.  It is handmade out of natural materials...

Sarangi Cattle-Bone Main Nut (Item Code: SRGI-MN) Size will vary, natural cattle-bone expect irregularities. Approximately 3 inches long and 3/8 on an inch high.

Sarangi String Guide (Item Code: SRGI-SG) Predrilled Cattle-Bone. Size and designs will vary from photo. Approximately 4.25 inches long. Natural cattle-bone, expect irregularities.

Sarangi Tuning Tool (Item Code: SRGI-WT) Wood tuning key for the flat sympathetic string tuning pegs. The wooden handle takes the stress of the tuning, and makes it easier on your fingers. Can be...

Saraswati Veena Bridge Set, Painted. Painted to add to the appeal. Replacement bridge for the Saraswati Deluxe. Colors may vary from photograph.

Replacement bridge for the Sarod. Made from Cattle-bone.

Sarod Chicari Post, Fish (Item Code: SARCF) Decorative Cattle-Bone fish, used to support the Chicari string on the Sarod. Measures approx.. 1 3/4".

Sarod Nut (Item Code: SARN) The design of the edge angle may vary. Approx. length is 3.12 inches.

Sitar Cattle-Bone End Plate (Item Code: STMP-EPB) Cattle-Bone end plate for a sitar. You will have to drill the holes to attach this plate to your sitar. Natural cattle-bone, expect irregularities...

Sitar Cattle-Bone Nut (Item Code: STMP-BN) Cattle-Bone Nut (tradan) for a sitar. Size and designs will vary from photo. Approximately 4.25 inches long. Natural cattle-bone, expect irregularities.

Cattle-Bone main string guide with 5 holes.

Sitar Toomba, Fancy (Item Code: STMP-TF) A hand carved wooden gourd toomba with a threaded brass fitting for mounting on the neck of full size fancy Sitars. Coloring and carvings may vary.