Replacement head for the 16" tupan drum. Includes wooden hoop for strength and stability.

Tabla Head Dayan, 5.5", SpecialThe special heads are made in Mumbai. The Mumbai head traditions makes heads from skins that are thicker than the typical heads. This makes them a little harder to tune but the durability is much better.

Quilted nylon gig bag with zipper closure and carrying handle, for storage and transport. Measurements: top diameter 11", bottom diameter 6", height 16.5". Measurements can vary slightly. Recommended for the MD10, MB10, and the MZ10 drums.

12-Inch steel tongue drum with Bhopali tuning and an antique bronze powder coating. Bhopali, also known as Bhoop, Bhpplai or Bhupali, is a Hindustani classical raga. It is a pentatonic scale. Raga Bhopali uses a scale that has great appeal not just in...

If you don't have one you'll want one as soon as you hear the sound this little instrument makes. Shake it and is sounds like thunder. Strike it on the spring and you get a thunder clap so real you may even see lighting. You can vary the pitch by putting...

Nickeled brass doumbek. Engraved with floral patterns, jingles mounted inside. Tunable with bolts. Comes with a synthetic head, color and opacity of head can vary. Includes tuning wrench. Other styles of head sold separately.

9" tipper with teardrop shaped knob-ends, and one sloped ridge mid-shaft. Simple and elegant.The tipper is swung back and forth against the head of a Bodhran to create lively rhythmic patterns. A tipper is also called a: bone, beater or cipin.The...

Standard sheesham (or similar hardwood) dayan is paired with an aluminum bayan. Both are strap tuned. Includes cushions, covers, tuning hammer and economy soft case. Cushion colors and patterns may vary.Dayan head diameter 5.5 inches. Average Dayan...

Allen Wrench, 3mm (Item Code: WRNA-3MM) 0 .118 inch (3mm) hexagonal tuning allen wrench for Turkish and Egyptian Tambourines.

A modern version of the traditional African agogo bell; similar to a guiro. An essential in any percussion kit.This solid wooden agogo has a single hollow bell. The outside of the bell is grooved to create a playing surface. By tapping and scrapping you...

The Dragon on the Timsha Bells-considered to be a protector or guardian. The timsha Bells are a ritual artifact by Buddhist Monks, as well as in the Shamanist traditions. The Timsha's are made of a complex alloy of bronze (copper and tin) and also...

10 white copper jingles used in tambourines. Diameter of jingles is approximately 2.1 inches. Jingles are packed in a 4 x 4 zip lock bag.

Sheesham, bolt tuned goatskin head with 18 sets of steel jingles. Includes tuning tool.

Nickel plated steel jingles without dimples (approx. 1.5" diameter) similar in size to the jingles on our featherweight tambourines.The center hole is approximately 3/16 of an inch (0.178 inches, or 4.5 -5 mm).

Fixed goatskin head with 12 sets of steel jingles.

Sympathetic string tuning peg for a Sur Bahar. 8 inches in length. Pegs do not have pre-drilled holes for the string, you will need to drill a hole in the peg for the string.

10" long with a great grip that reminds us of a birds head. There are two deep spoons, with tabs, that rest bowl to bowl. Hold the bird-head end in one hand and tap the spoons between your thigh and your free hand. You can get a few different sounds by...

Solid wood beater with real suede leather for singing bowl. Color may vary.

Singing Bowl Cushion. A perfect square shaped thin cushion on which to rest your singing bowl for display or while you play. The approximate size is 9.75" X 9.75"

Replacement bridge for the Sarod. Made from Cattle-bone.

29 DuPont Tynex hard nylon monofilament strings of different gauges. Strings are color coded in red, blue and clear to make it easier to play. This string set fits all our Minstrel Harps.Please Note: If you can't find the string set you are looking for,...

7" sheesham, tongues lock into two gears, creates a loud clack-clack-clack-clack when spun.

Quilted nylon gig bag with zipper closure and carrying handle, for storage and transport. Will accommodate 30 x 3" drum.

Sheesham wooden stick (also called Pullu) for tuning the Mridangam. The wooden stick is for holding it against the Mridangam head and tapping it with a stone to adjust the pitch.Item overall length is 4 5/8 inches.

Rubber Mallet. Beater end is covered in faux suede and it has a plastic handle. Overall length is 10.5 inches.

6 assorted finger picks for the sitar, including 2 metal wire, 2 plastic wrapped metal wire and 2 metal wire with wound tops.

Solid wood handle with a leather strap./!\ WARNING: CHOKING HAZARD - Small parts - Not for children under 3 years.

Replacement, for tuning the tabla. Approximate weight .26 kg or 260 grams. Color may vary.

Flat round piece of white goatskin.Thin = approximately 0.01 of an inch or 3-4 sheets of printer paperMedium = approximately 0.015 of an inch or 4-5 sheets of printer paperThick = approximately 0.02 of an inch or 5-6 sheets of printer paperAll skins sold...

This gong beater made from solid mulberry and dense foam wrapped by nylon. It is approximately 1 1/2" x 11".

Shaman Drum 14"x2", fixed goatskin head, mulberry frame, includes leather beater.

This 10 inch diameter frame drum shell consisting of 3 layers of mulberry wood for a total thickness of 5/16 inches and a depth of just under 3 inches. All edges are rounded over.

Esraj Cattle-Bone Nut (Item Code: ESMP-BN) Cattle-Bone Nut for a Esraj. Size and designs will vary from photo. Approximately 3 3/4 inches long and 3/4 inch tall at the center.

Pair of split bamboo percussion sticks, 24" and 20", each with a tuning hole. Natural cracks will develop in the bamboo. This only adds to the awesome buzzing sound. They are made in the northern Indian State of Uttar Pradesh. Also known as Buzz...

Tupan, also known as Daouli, Davul, Dawul, and Tabl Baladi, is a two-headed drum. This version is rope tuned. Includes beaters.

Standard sympathetic string tuning peg for a vichitra veena. Light finish. Approximately 8.5- 9 inches in length. The fit will need to be adjusted with sanding, and the excess length cut off.

Hand made gong stand constructed of sheesham. Hold up to a 26" gong. Gongs are sold separately.

Flat round piece of goatskin with hair.Thin = approximately 0.01 of an inch or 3-4 sheets of printer paperMedium = approximately 0.015 of an inch or 4-5 sheets of printer paperThick = approximately 0.02 of an inch or 5-6 sheets of printer paperAll skins...

Remo Kanjira (Khanjira), key-tuned, 7" Antique (Item Code ET-8227-00) The traditional Indian kanjira was made using skin of the now-endangered Monitor Lizard. Remo's synthetic Skyndeep lizard-graphic drumhead is an ecological tribute to the beauty of...

Economy nylon bag for a tabla set with shoulder strap and two handles. Features an 11" wide Velcro pocket on the side of the case that can hold instruction materials. The case's dimensions are 21" L x 10.75" W x 12" H and it will accommodate a number of...