Watch Video Demonstration of these Chimes

The TreeWorks Chime Damper w/ Mount is designed to be used with TreeWorks Chimes as well as other manufactures' chimes.

It is made of laser cut steel with a black powder coat finish. The tension of the damper is adjustable. The TRE54 also incorporates the TRE52 mounting bracket that can be attached to the tubular section of a stand.

No Extra Stand Needed - Just place your chime on the included mounting bracket. This leaves the top of your stand free for another instrument. Exact Sustain Control - The damper arm can be left loose and moved into action as needed. Or it can be locked into any position making it possible to precisely control how long the chime will ring.

One Handed Use - Totally rigid laser cut steel. The damper arm allows for smooth one handed movement with no twisting or binding. Not so with most designs.

Not only can you stop the chimes on command; the damper will keep the bars from accidentally sounding at unwanted times (like windy outdoor concerts, marching band or unstable stages).

The TreeWorks Difference

There are three components to the sound of a TreeWorks' chime: the cord, the mantle and the bars. At TreeWorks, each component is a serious contributor to the totally clean, crisp presence that these fine instruments produce.

It has been said that TreeWorks goes too far to create the perfect chime - as if your music didn't matter. Listen. It matters.

Not sure where to start? We have experienced drum techs on staff that are happy to walk you through our entire selection to find the best cajon for your needs.

Call us toll-free 1-800-771-9645.
Phone support hours are 8am - 9pm, New York Time, M-F.